Current IP Gateway
The current Gateway IP address.
MAC Timestamp
Shows the time of getting MAC address
Please select the proper network mode according to the network condition.
C66 provide three different network settings:
Static: If your ISP server provides you the static IP address, please select
this mode, then finish Static Mode setting. If you don’t know about
parameters of Static Mode setting, please ask your ISP for them.
DHCP: In this mode, you will get the information from the DHCP server
automatically; need not to input this information artificially.
PPPoE: In this mode, you must input your ADSL account and password.
You can also refer to 2.2.1 Network setting
to speed setting your network.
Obtain DNS server
automatically
Select it to use DHCP mode to get DNS address, if
you don’t select it, you will use static DNS server. The
default is selecting it.
Enable Vendor
Identifier
Enable/Disabled Vendor Identifier
Vendor Identifier
Custom vendor identification
If you use static mode, you need set it.
IP Address
Input the IP address distributed to you.
Subnet Mask
Input the Netmask distributed to you.
IP Gateway
Input the Gateway address distributed to you.
DNS Domain
Set DNS domain postfix. When the domain which
you input cannot be parsed, phone will automatically
add this domain to the end of the domain which you
input before and parse it again.
Primary DNS
Input your primary DNS server address.
Sencondary DNS
Input your standby DNS server address.