2.
[] Specifies a range that will match digit. It may be a range, a list of ranges
separated by commas, or a list of digits.
If user makes the above configuration, after user dials 11 digit numbers started
with from 135 to 139, the phone will send out 0 plus the dialed numbers
automatically.
Use this phone you can realize dialing out via different lines without switch in
web interface.
DIAL PEER
Field name
explanation
Phone number
There are two types of matching conditions: one is full
matching, the other is prefix matching. In the Full
matching, you need input your desired phone number
in this blank, and then you need dial the phone number
to realize calling to what the phone number is mapped.
In the prefix matching, you need input your desired
prefix number and T; then dial the prefix and a phone
number to realize calling to what your prefix number
is mapped. The prefix number supports at most 30
digits.
Destination
Set Destination address. This is optional config item.
If you want to set peer to peer call, please input
destination IP address or domain name. If you want to
use this dial rule on SIP2 line, you need input
