the IP and MAC address of this device.
Shows the DHCP Lease Table
，
the unit of Lease time is Minute.
Lease Table Name Specify the name of the lease table.
Start IP Address
Set the start IP address of the lease table.
End IP Address
Set the end IP address of the lease table, the
network device connected to LAN port will get IP
address between Start IP and End IP by DHCP.
Leased Time
Set the Lease Time of the lease table.
Subnet Mask
Set the Netmask of the lease table.
IP Gateway
Set the Gateway of the lease table.
DNS
Set the default DNS server IP of the lease table;
Click the Add button to submit and add this lease
table.
Select name of lease table, click the Delete button will delete the selected
lease table from DHCP lease table.
Enable DNS Relay
Select DNS Relay, the default is enabled. Click the
Apply button to become effective.
Notice:
1) The size of lease table cannot be larger than the quantity of C network
IP address. We recommend you to use the default lease table and not
modify it.
2) If you modify the DHCP lease table, you need save the configuration
and reboot.
8.3.2.6
TIME&DATE
Setting time zone and SNTP (Simple Network Time Protocol) server
according to your location, you can also manually adjust date and time in
this web page.
Summary of Contents for F52
Page 40: ......
