Use this phone you can realize dialing out via different lines without
switch in web interface.
DIAL PEER
Field name
explanation
Phone number
There are two types of matching conditions: one is
full matching, the other is prefix matching. In the
Full matching, you need input your desired phone
number in this blank, and then you need dial the
phone number to realize calling to what the phone
number is mapped. In the prefix matching, you
need input your desired prefix number and T; then
dial the prefix and a phone number to realize
calling to what your prefix number is mapped. The
prefix number supports at most 30 digits.
Destination
Set Destination address. This is optional config
item. If you want to set peer to peer call, please
input destination IP address or domain name. If
you want to use this dial rule on SIP2 line, you need
input 255.255.255.255 or 0.0.0.2 in it.SIP3 into
0.0.0.3
Port
Set the Signal port, the default is 5060 for SIP.
Alias
Set alias. This is optional config item. If you don’t
set Alias, it will show no alias.
Note: There are four types of aliases.
1) Add: xxx, it means that you need dial xxx in front of phone number,
which will reduce dialing number length.
2) All: xxx, it means that xxx will replace some phone number.
3) Del: It means that phone will delete the number with length
appointed.
Summary of Contents for F52
Page 40: ......
