[
䭞ޕ᮷ᆇ
]
38 / 41
Dial Rules
Name
Explanation
Press # to
invoke dialing
Set the gateway to press the # key to finish receiving number.
Use Fixed
Length
Set enable\disable use fixed length to dial.
Fixed Length
Set the gateway to receive a fixed length number; for example, if you set it as
11, when you finished dialing 11 digits number, the gateway automatically dial
the 11 digits number.
Invoke Calling
After Timeout
Enable/disable calling after timeout.
Timeout
Set the timeout calling length in seconds. Gateway default is 5 seconds, that
is , when the gateway received a number, it will deem that you have finished
dialing the number after you have not continue dialing a number in 5
seconds ,and it will dial the received number.
Digital Rule Table
The following is user-defined number-receiving rule table:
z
[] is defining the number range. It can be a range, can be separated by a comma, it can also
be a digit of list;
z
x means can math to any one digit;
z
. means can match to any length, including the null;
z
Tn means the device will stop receiving number after n seconds. n is mandatory, the range is
0-9 seconds. Tn must be the last two digits setting. If Tn is not specified, it will be assumed as
T0, the receiving number will end immediately.
As shown below: