38
Codecs Settings
Select enable or disable voice encodec:
G.711A/U,G.722,G.729,
G.726-16,G726-24,G726-32,G.726-40,
ILBC,opus
Media Setting
Receive Volume
Set the call volume to 1~9
G.723.1 Bit Rate
The value can be 5.3 KB /s or 6.3 KB /s
DTMF Payload Type
Enter the DTMF payload type, the value must be
96~127.
Send Volume
Set the call volume to 1~9
Opus playload type
Set Opus load type, range 96~127.
OPUS Sample Rate
Set Opus sampling rate, including opus-nb (8KHz) and
opus-wb (16KHz).
ILBC Payload Type
Set the ILBC Payload Type, the value must be 96~127.
ILBC Payload Length
Set the ILBC Payload Length
Onhook Time
Configure a minimum response time, which defaults to
800ms
Enable Hookflash
Whether to turn on the plug spring to generate Flash
Onhook Min Time
Configure a minimum response time, which defaults to
200ms
Caller ID Mode
Support bellcore
、
ETSI..
SLIC Impedance
Impedance settings
RTP Control Protocol (RTCP) Settings
CNAME user
Set CNAME user
CNAME host
Set CNAME host
RTP Settings
RTP keep alive
Hold the call and send the packet after 30s
9.18Phone settings >> Action
Action URL Event Settings
URL for various actions performed by the phone. These actions are recorded and sent
as xml files to the server. Sample format is http://InternalServer /FileName.xml
Note! The operation URL is used by the IPPBX system to submit device events.