Fanvil Technology Co., Ltd
HQ Add: Level 3, Block A, Gaoxinqi Building, Anhua Industrial Park, Qianjin 1 Road, 35th District, Bao'An, Shenzhen, 518101 P.R. China
Shenzhen Tel: +86-755-2640-2199 Fax: +86-755-2640-2618 Suzhou Tel: +86-512-6592-0605 SEA Tel: +60-3-512-21997
Email: sales@fanvil.com support@fanvil.com Beijing Tel: +86-10-5753-6809
- 46
Field Name
Explanation
Config
Encryption Key
Encryption key for the configuration file
Common Config
Encryption Key
Encryption key for common configuration file
Save Auto
Provision
Information
Save the auto provision username and password in the phone until the server url
changes
DHCP Option Settings
DHCP Option
Setting
The equipment supports configuration from Option 43, Option 66, or a Custom DHCP
option. It may also be disabled.
Custom DHCP
Option
Custom option number. Must be from 128 to 254.
Plug and Play(PnP)Settings
Enable PnP
If this is enabled, the equipment will send SIP SUBSCRIBE messages to a multicast
address when it boots up. Any SIP server understanding that message will reply with a
SIP NOTIFY message containing the Auto Provisioning Server URL where the phones
can request their configuration.
PnP server
PnP Server Address
PnP port
PnP Server Port
PnP Transport
PnP Transfer protocol – UDP or TCP
PnP Interval
Interval time for querying PnP server. Default is 1 hour.
Phone Flash Settings
Server Address
Set FTP/TFTP/HTTP server IP address for auto update. The address can be an IP
address or Domain name with subdirectory.
Config File
Name
Specify configuration file name. The equipment will use its MAC ID as the config file
name if this is blank.
Protocol Type
Specify the Protocol type FTP, TFTP or HTTP.
Update Interval
Specify the update interval time. Default is 1 hour.
Update Mode
1. Disable – no update
2. Update after reboot – update only after reboot.
3. Update at time interval – update at periodic update interval
