14
6.3 WEB configuration
When the device and your computer are successfully connected to the network, enter the IP
address of the device on the browser as http://xxx.xxx.xxx.xxx/ and you can see the login
interface of the web page management.
Picture 2 - WEB Login
The username and password should be correct to log in to the web page.
The default
username and password are "admin"
. For the specific details of the operation of the web
page, please refer to
6.4 SIP Configurations
At least one SIP line should be configured properly to enable the telephony service. The line
configuration is like a virtualized SIM card. Just like a SIM card on a mobile phone, it stores the
service provider and the account information used for registration and authentication. When the
device is applied with the configuration, it will register the device to the service provider with the
server’s address and user’s authentication as stored in the configurations.
The SIP line configuration should be set via the WEB configuration page by entering the correct
information such as phone number, authentication name/password, SIP server address, server
port, etc. which are provided by the SIP server administrator.
WEB interface
：
After login into the phone page, enter [
Line
] >> [
SIP
] and select
SIP1/SIP2
for configuration, click apply to complete registration after configuration, as shown below:
