This Configuration Guide is written as a general guide on how to configure the Fanvil phone
model X6U to work with PBXware 6.5.
Requirements
Identifying Phone Model
To start and successfully complete the registration of the Fanvil phone, users need to know
which phone model to set up.
On the back of each Fanvil phone, there is model information that you should check. Although
various phone models can have exactly the same requirements and installation procedures, they
can also have significantly different requirements and installation procedures, so that is why it
is important to know the model you own which results in you setting up the device successfully.
Phone Firmware
Make sure that the phone is loaded with an appropriate firmware version,
2.4.5
.
■
To find out the firmware version of the Fanvil phone model, open a new browser window and
■
enter the phone's IP address in order to access the phone's web administration interface login
screen. Example: http://192.168.1.22.
Log in to the phone's web administration interface with a username and password. Please note
■
that factory default login details are as follows: username is admin and password is admin.
