Com.X Administrator Guide
Page 52
Defaults to 1194.
Use LZO
Compression
The VPN may be configured to use compression on all
packets. This will save network bandwidth but incur some
performance penalty. Client and server configuration must
match.
Transport
Select between TCP and UDP for VPN transport.
VPN Public IP
The Public IP address of the VPN server, if required. This is
used allow client configuration to be generated automatically,
see next section.
VPN Public port
The associated port on the public IP of the VPN, if required.
3.2.5.2.1.1Routes
Routes are added by selecting the Routes tab once configuring the interface. Routes
on VPN interfaces are added as with any other network interface as described in
Section 3.2.6
3.2.5.2.1.2Generating certificates for clients
To generate authentication certificates for client devices, right-click on the interface in
the interfaces list, and select VPN Clients. Select New and enter the name of the
client. Review and apply your changes to create the client.
Figure 40: Select VPN Clients to generate licenses for client devices.
Once a client is created and the configuration applied, a certificate pack and/or
configuration pack for the client can be generated. Right-click the client in the clients
list, and select Get Configuration.
©2010 –
2016
Far South Networks
