Wanderbox installation guide
Page 16
3.4.2
Power
The Wanderbox unit is powered by connecting the AC/DC power adapter to the “Power”
input of the unit.
Use only the Wanderbox power adapter unit supplied with your product.
Note:
Using any other power adapter may cause erratic operation and/or damage the
Wanderbox unit.
3.4.3
Telephony interface connections
The Wanderbox unit supports the following range of telephony ports:
Analogue PSTN: Foreign Exchange Office (FXO)
Analogue Extension: Foreign Exchange Station (FXS)
Basic Rate ISDN (BRI)
Refer to the unit datasheet for technical specification of each of these ports.
3.4.3.1
Analogue PSTN (FXO)
The FXO port connector and cabling is described below.
Connector type: RJ11, 6P4C type
Cable: 2-wire twisted pair
Connector pin-outs:
Position
Pin#
Definition
1
1
-
2
2
-
3
3
Tip
4
4
Ring
5
5
-
6
6
-
©2018 Far South Networks