EN
EN
Manipulation of the winch is very simple and is done in
manoeuvring the telescopic handle after a back and forth
movement whose amplitude is variable according to the
convenience of the operator.
The movements of the market front and rear levers are
double effect, load moving every race of lever in either
direction of movement of the handle.
Store the appliance and the cable in a dry place, protected
from the weather. The cable must be stored on the drum
and completely out of the unit. Before you wrap on his
grinder, it is recommended to inspect it and clean it with
a brush to grease.
1. Lubricate the cable occasionally with light oil.
2. Graissez the gears every 6 months. To do this, remove the
clutch button and separate the left and right housings. Use
any good grade waterproof grease.
PULLING CAPACITY
1. This winch has a capacity of 900 kg. In practice, you can use it to:
a. Pull up to 900 kg initially stopped, on flat ground.
b. Move a maximum 4.5 t craft on the water.
c. Maintain moving a vehicle of maximum 5.4 t.
2. The ability to traction decreases depending on the slope. For example, the ability to run password 5.4 t on flat ground to 0.5 t on
upward slope of 45 °.
Degrees of tilt
Weight
(Tons)
2730
2275
1820
1365
910
455
10°
20°
30°
40° 45°
MAINTENANCE
MANEUVER
DECOMMISSIONING AND STORAGE
182013-3-Manual-E.indd 20
182013-3-Manual-E.indd 20
08/06/2022 12:21
08/06/2022 12:21
Summary of Contents for TF 1000
Page 2: ...182013 3 Manual E indd 2 182013 3 Manual E indd 2 08 06 2022 12 21 08 06 2022 12 21...
Page 25: ...01 02 182013 3 Manual E indd 25 182013 3 Manual E indd 25 08 06 2022 12 22 08 06 2022 12 22...
Page 32: ...TF 1000 182013 3 Manual E indd 32 182013 3 Manual E indd 32 08 06 2022 12 22 08 06 2022 12 22...
