ENGLISH
ENGLISH
GB-29
GB-28
Install your hob in total simplicity
NATURAL GAS
Counter
Gas connection (continued)
• Possible Connections
GAS DISTRIBUTED BY PIPELINE
(NATURAL GAS)
Use one of the 3 types of connection:
-
connection by rigid tube
(gas standard name
G1/2).
Make the connection directly to the end of
the elbow mounted on the appliance, or -
connection by corrugated reinforced flexible
hose with mechanical tips
(fig. A on the
previous page).
You can also use a flexible pipe in stainless steel
(of «Gazinox” type) available from your local
distributor, or -
connection by flexible pipe with
mechanical tips
(fig. B on the previous page).
These pipes must have a maximum length of
2
metres
and a validity date that has not expired.
Install your hob in total simplicity Gas
connection (continued)
• Possible Connections
GAS DISTRIBUTED BY BOTTLE OR
TANK (BUTANE/PROPANE GAS)
For the safety of the user, we recommend a
connection either by rigid tube if this is possible,
or with a corrugated reinforced flexible pipe
(maximum length 2 metres)
(fig. A)
.
In the case of an existing installation
where
the fitting of a rigid tube is impossible, it is
always possible to perform the connection with
a flexible pipe (maximum length 2 metres)
fitted
with two clamps:
one on the connector (
fig. B
,
and the other on the expansion valve, without
forgetting to put a sealing washer in place
between the connector and the elbow of the
table.
You will find the adapter and the sealing washer
in the pouch supplied with the appliance.