FAR DP2620IL, Manual

ENGLISH

ENGLISH

GB-13

GB-12

Setting the thermostat knob

•  The refrigerator is controlled with a thermostat 

knob located inside the fridge, towards the 

upper right-hand corner. Turn the knob from 

the STOP(0) position towards the higher 

numbers fro colder temperatures. The knob 

can be adjusted from setting 1 to 7. 

•  Higher settings on the knob(higher numbers) 

mean lower temperatures(colder) in all 

compartments of the appliance.

•  Changes of the ambient temperature affect 

temperatures in the interior of the appliance 

so choose a correct setting of the temperature 

control knob, depending on your ambient 

conditions.

•  In the STOP(0) position the appliance does 

not operate(the cooling system isswitched off), 

but power supply is not interrupted.

•  Set the thermostat knob to a middle position 

to achieve -18°C in the freezer compartment.

•  Please Note: If the appliance is switched 

off you must wait at least 5 minutes before 

restarting the appliance or re-inserting the 

plug into the wall outlet.

•  This is to allow the protection device in the 

compressor to reset.

•  If the compressor fails to start correctly 

remove the plug and wait for 5 minutes before 

you try again then the compressor should 

restart normally.

•  The storage temperature may be affected by:

– The room temperature

– How often the door is opened

– How much food is stored

– Position of the appliance

•  When you set the correct temperature, all 

these factorys mentioned above shall be taken 

into account.

Temperature Indicate

In order to help you get the correct 

adjustment of your device, it is 

equipped with a temperature gauge 

placed in the coldest area.

For the proper storage of food in 

your refrigerator and in particular 

in the coldest area, make sure that 

«OK» appears in the temperature 

indicator.