WARNING!
• For the sake of personal safety,please remove the fuse,disconnect the
circuit breaker or turn off the power plug before installa on.
• Do not use extension cords or duplex adapter.
• The plug must be inserted into a suitable socket, which should be
properly installed and grounded in accordance with all local rules and
regula ons.
• This machine can only be maintained by qualified maintenance
personnel.Repair by personnel without relevant experience may cause
personal injury or serious failure.
• Please connect it to a rated,protected and appropriately sized power
circuit to avoid electrical overload.
Final Installa on & Inspec on
Please check whether the dishwasher is installed properly.
1. Turn on the power supply.
2. Turn on the water supply.
3. Ensure that the machine door can be opened and closed smoothly.
• Please level the dishwasher again,if necessary.
• Please ensure that the dish rack is leveled if the door cannot be closed.
The picture below shows the inclined dish rack.
• Please ensure that all packaging materials have been removed.
4. Turn on the dishwasher and run the "Intensive" program to verify proper
opera on.
5. Check the drain and inlet pipes for leaks.
GB-17
