English
English
GB-15
GB-14
MAINTENANCE
FREEZER DEFROSTING
• Frost will accumulate inside the freezer depending upon the length of time during
which the door is left open or the amount of moisture introduced.
• It is essential to ensure that no frost or ice is allowed to form at places where it will
affect the close fitting of the door seal.
• This might allow air to penetrate the cabinet, thus encouraging continuous running
of the compressor.
• Thin frost formation is quite soft and can be removed with a brush or plastic
scraper. Do not use metal or sharp scrapers, mechanical devices or other means to
accelerate the defrosting process. Remove all dislodged frost from the cabinet floor.
• For the removal of thin frost it is not necessary to switch off the appliance.
• For the removal of heavy ice deposits disconnect the appliance from the mains
supply and empty the contents into cardboard boxes and wrap in thick blankets or
layers of paper to keep them cold. Defrosting will be most effective if carried out
when the freezer is empty, and it should be carried out as quickly as possible.
• An increase in temperature of frozen food packages during defrosting will shorten
the storage life. Provided that the contents are well wrapped and placed in a cool
area, they should keep for several hours.
• Examine the contents when replacing them in the freezer and if some of the
packages have thawed out.
FRIDGE DEFROSTING
• The fridge defrosting process is carried out automatically every time the
compressor stops.
• The defrost water is automatically routed to the drain port and into a tray placed on
the top of the compressor to the rear of the appliance from which it evaporates.
• Make sure the drain port on the fridge at the rear of the appliance is kept clear.
2.
Position the middle hinge on the left
of the refrigerator and insert the gun
of hinge in the hole of the door then
fix it firmly.
3.
Fix the left door stop on the left of the door of the freezing compartment. Align
the lower hole of the door to the gun of the left middle hinge while taking care of
the alignment of the door compared to the refrigerator.
4.
Insert the gun of the upper hinge in
the upper hole of the door then fix it
firmly. Cover the hinge with the lid.
