ENGLISH
ENGLISH
GB-17
GB-16
REVERSE DOOR
Follow the following stages to reverse the door
from its initial position.
DEPOSIT DOORS
1. Withdraw the lid of the right upper hinge
with a screwdriver. Then unscrew the screws
and remove the upper hinge. Deposit the
door of the freezing compartment.
2. Remove the right middle hinge; deposit the
door of the refrigerating compartment.
the internal temperature of the fridge from
rising.
Keep your fridge full, but not over crowded, this
helps reduce
“
cold
”
air loss. Meanwhile, avoid
overloading the fridge or freezer. Try to leave
about 20% free space for air circulation.
To prevent cold air escaping, limit the frequency
of opening door. When retuning from shopping,
sort foods to be kept in your fridge before
opening the door. Only open the door to put
food in or take it out.
Make sure the door seal is clean and in good
condition. It should hold a piece of paper tightly
in place when shut.
Defrost regularly or when ice is more than
5mm thick. Thick ice covering the inner sides
significantly increases energy use.
The combination of the drawers, baskets and
shelves shown in the device description is
optimal for efficient energy savings. Changing
the combination proposition could alter the
efficiency.
