ENGLISH
ENGLISH
GB-11
GB-10
USE
• This appliance is designed to operate in
If these temperatures are exceeded, i.e. colder
or warmer, the appliance will not operate
correctly. If the ambient temperatures are
exceeded for long periods, the temperature in
the freezer section will rise above -18°C and
food spoilage may occur.
• Remove all packaging materials from the
appliance. Wash the inside of the cabinet
with lukewarm water and bicarbonate of soda
(5ml to 0.5 liter of water). Dry the appliance
thoroughly.
• When you use the freezer for the first time
or after defrosting, set the thermostat control
to the maximum position for at least 2 hours
before introducing food to be stored, and then
readjust to the normal position.
• If there is a power failure, do not open the
door. Frozen food should not be affected
if the failure lasts for less than 25 hours. If
the failure is longer, then the food should
be checked and either eaten immediately or
cooked and then re-frozen.
SETTING THE THERMOSTAT KNOB
The refrigerator is controlled with a thermostat
knob located inside the fridge, towards the upper
right-hand corner. Turn the knob from the
STOP (0/OFF) position towards the higher numbers
for colder temperatures. The knob can be
adjusted from setting 1 to 7.
Higher settings on the knob (higher numbers)
mean lower temperatures (colder) in all
compartments of the appliance.
Changes of the ambient temperature affect
temperature in the interior of the appliance
so choose a correct setting of the temperature
control knob, depending on your ambient
conditions.
In the STOP (0/OFF) position the appliance does not
operate (the cooling system is switched off), but
power supply is not interrupted.
Set the thermostat knob to a middle position to
achieve -18°C in the freezer compartment.
Please Note:
If the appliance is switched off you must wait at
least 5 minutes before restarting the appliance or
ambient temperature between 16°C and 38°C.
