GB
14
Q
P
11 mm
16 mm
P
27 mm
I
WARNING!
Disconnect air feed when performing those operations.
MAINTENANCE AND CHANGE OF SIZE
(pic.
f15-f16-f17-f18
))
The prolonged use of the riveting tool can cause the slipping of the clamps on the nail because of the impurities. For this reason,
it is necessary to lubricate the clamps after cleaning. However, if clamps are worn out and their proper functioning compromised,
they must be replaced. First remove the head which carries the nozzle (
I
), by means of a standard spanner of 27 mm. Then, by
using two standard spanners of 11 mm and 16 mm, remove the cone (
P
) and extract the clamps (
Q
).
When replacing the nozzle (
L
), use the proper supplied wrench and screw the removed nozzle in it in order to avoid losing the nozzle.
f15
f17
f16
f18
L
RAC 181
RAC 181
sales@air-allied.com.au
Air & Allied Sales (Pacific) Pty Ltd
www.air-allied.com.au
