13400 Owner’s Manual
P/N 446613 Issue I Rev. A
III-5
Install the Sub-Chassis Assembly
A. Secure the Sub-Chassis
Assembly to the enclosure using
six #6-32 x 1/4” screws (P/N
29529-11).
B. Connect the Stripped wire end of
the Ground Wire to the GND
position of the AC terminal block.
C. Place ring terminal end of the
Ground Wire under the head of
the nearest mounting screw.
(See Detail below)
Ground Wire Mounting Detail
Stripped wire end mounted
under GND terminal of AC
terminal block
Ring terminal end mounted
under mounting screw for
Sub-Chassis Assembly
firealarmresources.com
