Introduction
7
F
RONT
PANEL
All status indicators (LEDs) and por ts for connecting to other devices
and networks are on the front panel.
S
TARLET
G
IG
S
WITCH
LED
S
A set of Link and Activity LEDs indicate the status of each por t.
The Power LED indicates the unit is receiving power.
P
OWER
LED
The Power LED is lit solid green when the switch is receiving power.
L
INK
LED
S
The LED is lit solid green when a valid 1000 Mbps link is established
at the por t. The LED is off when there is no link.
A
CTIVITY
LED
S
The LED blinks green when the por t is receiving or transmitting data
on the 1000 Mbps network. The LED is off when no data is detected
at the por t.
S
TARLET
G
IG
S
WITCH
PORTS
The four 1000Base-SX por ts with SC connectors provide the full
duplex multimode fiber Gigabit connections to the switch.
When connecting a Gigabit device to the Fast Starlet Gig Switch using
multimode SC cable, be sure that the TX (transmit) and RX (receive)
ends of the cable are correctly connected to the RX and TX por ts on
both devices. See “Installation” on page 9 for more information.
a.book Page 7 Monday, January 17, 2000 4:00 PM