6
Chapter 2
H
ARDWARE
INSTALLATION
Consult your computer’s manual for instructions on installing a card in
a PCI slot before you begin.
1.
Power down and unplug your computer.
2.
Locate an available PCI slot and remove any access cover,
retainer clamp or screws. Keep retainer clamps or screws for
securing the SkyLINE PCI Card in place.
3.
Ground yourself and take your SkyLINE PCI Card from its antistatic
bag, handling the card by its edges to avoid touching the
components.
4.
Align the card with the PCI slot and press firmly until the
connector is fully seated in the slot, with no gold pins showing.
5.
Screw the SkyLINE PCI Card card firmly into the PCI slot using the
retainer clamps or screws.
6.
Inser t a SkyLINE PC Card into the PCI card slot.
7.
Reassemble your computer according to the instructions in its manual.
8.
After the SkyLINE PCI Card is installed with a SkyLINE PC Card
inser ted in it, you can install the necessar y driver and configure
your card for your wireless network. See the next page for
Macintosh software installation instructions.
Summary of Contents for SkyLINE 11Mb
