USE AND MAINTENANCE MANUAL - SECTION 1
ELEVAH 61 AERIAL PLATFORM – Rev. 03_2020
Page 1-2
PRELIMINARY PROCEDURES
Operator training and knowledge
Carefully read the manual before using the machine.
Use the machine only after being fully trained by authorised personnel.
The machine can only be used by authorised and skilled personnel.
Read carefully and comply with all the WARNING statements and the operational instructions
reported on the machine and in the manual.
Use the machine for applications falling within those intended by Faraone Industrie Spa.
All operational personnel must familiarise with the emergency controls and operation of the
machine, as specified in the manual.
Carefully read and comply with all company, local and government regulations in force, relating
to machine operation.
Inspection of the work place
Before using the machine, the operator must take the necessary precautions to avoid any hazard
in the work place.
Do not operate the machine on lorries, trailers, railway carriages, boats in water, scaffolding or
similar, unless Faraone Industrie Spa has approved the operation in writing.
The machine can be switched on at temperatures between -15°C and 40°C. Contact Faraone
Industrie for machine operation at temperatures not within the indicated range.
The machine cannot be switched on in environments stated as ATEX, unless specifically
indicated in the EC certificate of conformity delivered with the machine in question.
Machine inspection
Use the machine only after having carried out the inspections and functional checks. For further
instructions, refer to
Section 2
of this manual.
Operate the machine only after having carried out all assistance and maintenance set out in the
requirements specified in this manual.
Make sure all safety devices work properly. Any changes to such devices constitute a breach of
the safety regulations.
Do not operate the machine if its signs or decals indicating the safety regulations or instructions
are illegible or missing.
Avoid the accumulation of debris on the floor of the machine. Prevent mud, oil, grease and other
slippery substances from coming into contact with shoes and with the floor of the machine.
ATTENTION
ANY CHANGES OR ALTERATIONS TO THE MACHINE MAY ONLY BE CARRIED OUT WITH
PRIOR WRITTEN AUTHORISATION BY THE MANUFACTURER.
Summary of Contents for ELEVAH 61
Page 61: ...NOTES ...