STEAM
MIN
5
IRONING WITHOUT STEAM
The Iron can be used with or without water in the Tank. However,
it is best to avoid having the Tank too full of water while ironing
without steam.
1. Position Temperature Control Dial to the lowest MIN setting.
2. Turn the Variable Steam Dial to NO STEAM.
3. Stand the Iron on its Heel in an upright position on an iron-safe
surface and plug it in.
4. Turn the Temperature Control Dial to the desired setting.
5. When the Heating/Ready Light turns off, the Iron has reached
the desired temperature.
6. If desired, you may still use the Spray Button or Blast of Steam
Button as long as there is water in the Tank.
7. When finished, turn Temperature Control Dial to the lowest
MIN setting and unplug. Allow the Iron to cool before cleaning
the exterior or before storing.
NOTE: During ironing, the Heating/Ready Light may turn on again
which indicates that the Iron is heating up to maintain the
proper temperature.
CAUTION: If the Iron has been used for a long period of time and
is hot, DO NOT fill it with water.
Temperature Control Dial
Variable Steam Dial
