INSERTING BEATERS/COOKIE DOUGH
HOOKS
CAUTION: Use either both Beaters or both Cookie Dough Hooks. Do
not attempt to use a Cookie Dough Hook with a Beater. This could
damage the Mixer.
1. Place Stand Mixer on a dry, level surface.
2. Press Head Release Button while pivoting Mixer head upwards.
See Figure 1. DO NOT attempt to pivot Mixer head without first
pressing Head Release Button. This could damage the Mixer.
NOTE: Beaters and Cookie Dough Hooks have two types of stem
disks: round and hexagonal.
3. Insert Beater or Cookie Dough Hook stems, one at a time, into
holes on underside of Motor Housing. See Figure 2. Insert
Beater or Cookie Dough Hook with round stem disk into round
hole; hexagonal stem disk into hexagonal hole. See Figure 2
inset drawing. Push in firmly and twist slightly to lock each
Beater or Cookie Dough Hook into place.
5
Release
Start
Stop
— +
On/Off
16
SPEED
MIXER
Figure 2
ROUND
STEM DISK
ROUND HOLE
R
Start
Stop
— +
On/Off
16
SPEED
MIXER
Figure 1
