7
5. Press ON/OFF Button
once. The number "1"
will flash green in the
LED Display. This indi-
cates the Mixer is turned
on and in standby mode.
If the LED does not light,
the Mixer is not in
standby mode. Press
ON/OFF Button a
second time to re-set
the Mixer.
6. Press either of the Speed Control Buttons to increase ("+" Up Button)
or decrease ("-" Down Button) the mixing speed. See
"Recommended Speed Guide" on page 10 for detailed information.
Press Speed Control Button once to change speed by one setting.
Hold Speed Control Button down to increase or decrease speed
rapidly.
Always start mixing with a slow speed setting. Then, adjust
speed setting higher to match consistency of the ingredients.
7. Press START/STOP Button once to begin mixing. The LED will stop
flashing and show the speed setting in a constant green.
Upon start-up, the Mixer motor starts slowly and gently increases
its speed to the selected speed setting. This prevents ingredients
from splattering.
Additional ingredients can be added slowly to the Mixing Bowl dur-
ing operation.
8. Press either speed setting button to increase speed setting ("+"Up
Button) or decrease speed setting ("-" Down Button) as desired.
9. Press START/STOP Button once to stop mixing. The Mixer will
stop mixing and stay in standby mode (speed setting will flash).
Use a rubber or plastic spatula to scrape sides and bottom of
Mixing Bowl, as desired. Press START/STOP Button once to con-
tinue mixing until ingredients reach the desired consistency.
CAUTION: DO NOT scrape sides or bottom of Mixing Bowl
while Mixer is in operation.
MIXING (CONT.)
Release
Start
Stop
— +
On/Off
16
SPEED
MIXER
Head Release
Button
LED Display
Start/Stop
Button
Up Button
Down
Button
Power ON/OFF
Button
