- 6 -
Mi 2587
IT
al
Iano
EN
glish
FR
ança
Is
Es
pañol
P
o
R
T
uguês
DEutsch
Pure IP' push-button panel with the following features:
- 316L stainless steel plate with 16 steel buttons;
- fastening by means of 6 Torx security screws with central
peg;
- flush mounting;
- camera with 5 mega pixel resolution;
- large graphic display;
- RFID module ready;
- connectivity: Ethernet and WiFi;
- integration with video surveillance cameras and advanced
implementation systems such as QR code;
- management via app with installer account: registrations,
updates, remote configurations;
- use of IP EVO app with user account: secure access ma-
nagement via smartphone;
- data protection via integrated security system with de-
dicated chip.
Technical data
Power supply
via PRS210
Door lock release activation time
max. 9 sec.
Camera resolution
5 Mp
Camera focal lenght
2,3 mm
Camera's LEDs
3 (white)
Operating temperature
0 ÷ +45 °C
Massimum allowed humidity
90% RH
Terminals and connectors
PB
/PB
Door lock release push-button
S+/S-
Main output for electric door lock
(max 13 Vac - 1
A)
C/NO/NC Contacts for additional relay
(max 24Vdc - 2 A)
J2
Connector for Ethernet cable
WARNINGS
Carefully read the next warnings.
For the power supply of the door station, use the tran-
sformer item PRS210 (or a
power supply with the
same electrical characteristics
) and carefully read
the safety warnings in the previously mentioned tran-
sformer instruction manual.
For cleaning, do not use water or chemical solvents,
but a clean cloth.
This equipment must be connected to the Internet via
high-speed access. The quality of the performance
offered to the user is drastically influenced by the
quality, stability and speed of the network connection
used. Since this is a device installed in a fixed location,
it is recommended to use a cable connection. The ma-
ximum length of the cable connected to the switch/
router must not exceed 80 m. The DHCP function is
required.
Do not leave parts of the packaging (plastic bags, expan-
ded polystyrene, etc.) within reach of children.
Do not open the unit when it is switched on.
The execution and maintenance of the system must be
carried out by specialised personnel and in accordance
with the laws in force.
Electric door lock
The electric door lock is operated directly from the door sta-
tion, the module delivers a peak current of >1A for 10msec.
and a holding current of 180mA for the actuation time, so
the electric door lock must be of the type 12Vac/1A max.
During operation of the door lock, the audio/video signal
may be disturbed.
To operate door locks with different characteristics, it is
suggested to use an additional power supply and a 24Vdc
relay.
IMPORTANT
It is necessary to connect a noise suppression device when
operating an inductive load, e.g. an electric door lock (SE).
Suppressors (type transil -1.5KE39CA) should be connected
as close as possible to the load (i.e. on the terminals).
AL
230V
127V
0
relé 24Vcc
SE
S+
S-
PA
PB
PB
A+
A-
PRS210
230V
127V
0
SE
Transill
1.5KE39CA
PA
=
Door lock release push-button (optional)
RL
=
Relay (24Vdc)
AL
=
Additional power supply
Stainless steel external door station for IP EVO technology
RL
