- 21 -
Mi 2446IGb
Kontrola temperatury
Kontrola temperatury pozwala na zarz¹dzanie ogrze-
waniem lub klimatyzacj¹ w domu. Ta funkcja mo¿e byæ
zarz¹dzana przez u¿ytkownika, procedura planowania jest
przedstawiona w instrukcji u¿ytkownika.
Niemniej jednak procedura zmiany ustawieñ kontroli ogrzewania jest
doœæ skomplikowana dlatego powinna byæ wykonana przez wykwalifi-
kowanych techników lub przez doœwiadczonych u¿ytkowników.
Jak zaprogramowaæ zewnêtrzny przekaŸnik do
poleceñ systemu grzewczego lub klimaty-
matyzacji
Kontrola ogrzewania jest normalnie zarz¹dzana przez we-
wnêtrzny przekaŸnik 1, jednak¿e do tej funkcji mo¿na równie¿ wyko-
rzystaæ zewnêtrzny aktuator. Nale¿y wykonaæ poni¿sz¹ procedurê:
- Jak utworzyæ nowy aktuator
"menu"
"Aktuatory/Zdarzenia” “Zarz¹dzanie aktuatorami”
“nowy aktuator”
wprowadŸ nazwê aktuatora (zaleca siê nadanie
odpowiedniej nazwy “PrzekaŸnik kontroli ogrz.)
Zapisz
wpro-
wadŸ adres aktuatora (od 211 do 230 nie u¿ywany przez inne aktu-
atory) Zapisz
wciœnij “podgl¹d” obok odpowiedniej nazwy aktuatora
wybierz “Do zdarzenia”
lub “menu”.
- Wybierz zewnêtrzny przekaŸnik do kontroli ogrzewania
"menu"
"Regulacja temperatury”
"programowanie”
wybierz
“przekaŸniki zewnêtrzne”
widzisz listê zaprogramowanych aktuatorów,
wybierz wczeœniej dodany przekaŸnik do zarz¹dzania kontrol¹
ogrzewania (np.: “przekaŸnik kontr. ogrz.)
.
Ustawienia zaawansowane
Nastêpuj¹ce strony zawieraj¹ informacje i ustawienia
które maj¹ wp³yw na dzia³anie systemu. Dlatego te ope-
racje programowania musz¹ byæ wykonane przez insta-
latorów lub doœwiadczonych u¿ytkowników.
Aby wejœæ do menu nale¿y wykonaæ poni¿sz¹ procedurê:
"menu" "ustawienia” "zaawansowane” "
"
"
"
.
Przejdziesz do strony gdzie wyœwietlone s¹ nastêpuj¹ce funkcje:
Edytuj pulpit -
Mo¿esz wybraæ z listy 3 funkcje które bêd¹ przypi-
sane do 3 przycisków wyœwietlanych na stronie g³ównej razem z ich
pozycj¹ na ekranie (góra, œrodek, dó³).
Mog¹ byæ wybrane nastêpuj¹ce funkcje:
- Aktuatory/Zdarzenia
- Regulacja temperatury
- Lista notatek
- Kontakty
- PrzejdŸ do urz¹dzenia
pozwala na wyœwietlenie przycisku wy-
wo³ania do okreœlonego u¿ytkownika z listy lub przycisk kasety
zewnêtrznej na stronie g³ównej.
- Podgl¹d kamery
umo¿liwia utworzenie przycisku podgl¹du jed-
nej z kaset zewnêtrznych na stronie g³ównej.
- Lista kamer
- Panel aktuatorów
- PrzejdŸ do aktuatora
pozwala na wyœwietlenie ikony okreœlo-
nego aktuatora na stronie g³ównej
- Panel zdarzeñ
- PrzejdŸ do zdarzenia
pozwala na wyœwietlenie ikony okreœlo-
nego zdarzenia na stronie g³ównej
Heating control
The heating control allows to manage the heating or air
conditioning plant of the house. This function is normally
managed by the user, the planning procedure is illustrated
by the user guide.
Herewith the procedure for changing the heating control checking
relay is just mentioned, because this is a complex planning it should
be performed by trained technician or by experienced personnel.
How to program an external actuator to command the
heating or conditioning system.
The heating control is normally managed by the internal
relay n.1, but for system exigencies an external actuator
for this function can also be used. Please, proceed as it follows:
- How to create a new actuator
"menu"
"Actuators/Events"
"Manage actuators"
"new
actuator"
insert the actuator name (it’s advised to call it with an
appropriate name –
e.g. “Temp.control relay”)
Save
insert the
address of the actuator (from 211 to 230 not used by other actuators)
Save
press “details” in correspondence to the name of the
actuator
select "on event"
or "menu".
- Select the external relay for the heating control
"menu"
"heating control"
"programming"
select "remote
relay"
the list of the programmed actuators is showed on the
display, select the relay previously created by the heating control
managing
(E.g. “Temp.control relay”.)
.
Advanced settings
The following pages contain information and settings that
are useful for the operation of the system. Programming
operations must be therefore carried out by the installer
or by expert users.
To access the menu you must carry out the following procedure:
“menu”
“settings”
“advanced"
"
"
"
"
.
You go to a page where the following functions are listed:
Home page –
you can select from a list the 3 functions to be
associated with the 3 buttons that are displayed in the main page,
together with their position on the screen (up, centre, down).
The following functions can be selected:
- Actuators/Events
- Heating control
- Notes
- Directory
- Link to Station
allows for displaying the call button of a specific
user from the agenda or the button of an external videointercom
station on the Home Page.
- Monitor
allows for displaying the monitor button of one of the
videointercom entrances on the Home Page.
- Monitor list
- Actuators panel
- Link to actuator
allows for displaying the icon or button of an
actuator on the Home Page.
- Events panel
- Link to event
allows you to display the icon on the Home page
of a specific event.
- Buttons panel
Summary of Contents for myLogic ML2262C
Page 55: ... 55 Mi2446IGb Notatki Notes ...