- 24 -
Mi 2446IGb
Aby aktywowaæ funkcjê ochrony wykonaj poni¿sz¹ procedurê:
- wciœnij “zmieñ” po prawej stronie pola tekstowego z nazw¹ funkcji
wybierz “
TAK
”, aby w³¹czyæ ochronê lub “
NIE
”, aby wy³¹czyæ.
Wciœnij
, aby zatwierdziæ i przejœæ do poprzedniego menu.
- TxA1 (dzwonek do drzwi)
Po wciœniêciu dzwonka do drzwi tylko monitor z zaciskami (A1 i GN)
pod³¹czonymi do przycisku dzwonkowego bêdzie dzwoni³. Aby
przekierowaæ dzwonek do innych monitorów w mieszkaniu
nale¿y wykonaæ poni¿sz¹ procedurê:
- wciœnij “Zmieñ” po prawej stronie pola tekstowego z nazw¹ funkcji
wybierz
“TAK
”, aby przekierowaæ dzwonek do innych monitorów w
mieszkaniu, wybierz “
NIE
” aby nie przekierowywaæ dzwonienia.
Wciœnij
, aby zatwierdziæ i przejœæ do poprzedniej strony
Wciœnij
, aby przejœæ do menu “Zaawansowane”.
Linia komend -
ta funkcja pozwala na zmianê podstawowych para-
metrów monitora myLogic. Funkcja s³u¿y do naprawy krytycznych
b³êdów systemu i dlatego powinna byæ u¿ywana
tylko i wy³¹cznie
z pomoc¹ dzia³u technicznego Farfisa.
Jeœli przypadkowo wszed³eœ do tej funkcji wciœnij przycisk nawigacy-
jny
C,
aby opuœciæ menu.
Uwaga: losowe zmiany tego parametru mog¹ spowodowaæ
nieprawid³owe dzia³anie ca³ego systemu
Informacje o pamiêci
- Informacje o pamiêci monitora myLogic;
wyœwietlane s¹ informacje o dostêpnej i zajêtej pamiêci. Wciœnij
przycisk , aby przejϾ do poprzedniej strony.
Karta pamiêci -
To menu zawiera funkcje odnosz¹ce siê do
u¿ywania karty pamiêci.
W szczególnoœci dostêpne s¹ nastêpuj¹ce funkcje:
-Import obrazu -
Importuje obrazy z karty pamiêci do urz¹dzenia
- Aktulizacja -
uaktualnia software urz¹dzenia.
Uwaga. Nieprawid³o-
we u¿ycie tej funkcji mo¿e spowodowaæ nieprawid³ow¹ pra-
cê urz¹dzenia. W zwi¹zku z tym ta funkcja powinna byæ
u¿ywana tylko z pomoc¹ dzia³u technicznego Farfisa.
Jeœli przypadkowo wszed³eœ do tej funkcji wciœnij natychmiast
, aby wyjœæ z menu i powróciæ do menu Karty Pamiêci.
-Informacje o karcie pamiêci
- Informacje o dostêpnej pamiêci
i o jej zajêtoœci.
-Eksport ustawieñ
- funkcja eksportowania ustawieñ monitora dla
wsparcia pomocy technicznej.
Z tej funkcji nale¿y korzystaæ tylko
w asyœcie dzia³u technicznego Farfisa.
.
- Import ustawieñ
- funkcja importu ustawieñ monitora myLogic
Z tej funkcji nale¿y korzystaæ tylko w asyœcie dzia³u techniczne-
go Farfisa.
- Wyjmij kartê pamiêci
- Pozwala na bezpieczne usuniêcie z mo-
nitora myLogic karty pamiêci
Informacje o systemie
- Informacje o zainstalowanej wersji systemu
To active the lock function follow the procedure below:
- press “modify” on the right of the text box with the function name,
select “
YES
” to lock programming, select “
NO
” to unlock it. Press
to confirm and go back to the previous page.
- Tx A1 (floor call extension)
Upon a floor call only the home automation terminal with terminals
(A1 and GN) connected to the chime button will ring. To drive the
chime to all the other home automation terminals of the apartment
you must carry out the following procedure:
- press “modify” on the right of the text box with the function name,
select “
YES
” to drive the chime to the other home automation
terminals in the apartment, select “
NO
” not to drive it.
Press
to confirm and go back to the previous page.
Press
to go back to the “Advanced” menu.
Command line
– this function allows to change basic parameters
of the myLogic home automation terminal. Programming has been
inserted to make corrective action possible on severe criticalities
of the system and therefore the command must be used
exclusively
with the assistance of a Farfisa technician.
If you enter the menu
involuntarily, press button
C
on the navigation key to exit.
Warning:
random changes of this parameter can case severe
malfunctioning of the entire system.
Memory Info –
Information on the memory of the myLogic home
automation terminal; information on available memory and memory
organization is displayed. Press
to go back to the previous
page.
Memory card
– This menu contains functions that refer to specific
use of the memory card.
In particular, the following functions are available:
- Import image
– it imports images from the memory card into the
device.
- Updating
– it updates the device software.
Warning. The
incorrect use of this function can cause severe malfunctioning
of the device. Therefore this function must be exclusively used
with the assistance of a Farfisa technician.
If involuntarily access this menu, press immediately
button to
exit and go back to the Memory Card menu.
- Memory Card Info
– Information on available memory and
memory organization is displayed.
- Export settings
– it exports the myLogic home automation
terminal settings for support and technical assistance activities.
To operate this function the assistance of a Farfisa technician
is necessary.
- Import settings
– it imports the myLogic home automation
terminal settings for support and technical assistance activities.
To operate this function the assistance of a Farfisa technician
is necessary.
- Remove memory card
– it allows for safe removal of memory
card from the home automation terminal.
System Info
– Information on installed software version.
Default –
it resets the default settings.
Warning: by pressing this button all data and settings that were
previously saved will be deleted.
Summary of Contents for myLogic ML2262C
Page 55: ... 55 Mi2446IGb Notatki Notes ...