RESTRICTED USE ONLY
Fargo Electronics, Inc.
DTC400/DTC300/DTC300M Card Printer User Guide (Rev. 1.1)
1-4
Reviewing the DTC400/DTC300/DTC300M Sequence of Operations
The following sequence describes a full color print job with magnetic encoding.
Step Process
1
The File information is received from the PC
2
Printer checks the installed Ribbon type stored in memory against the Ribbon
type command that was sent from the Printer.
a. If Ribbon type does not match, the media light will begin flashing.
3
The Card Input Motor and Print Stepper Motor engage.
4
The Card Feed Sensor detects leading edge of card and disengages the card
input Motor.
Continued on the next page
