C50 Card Printer Service Manual PLT-01278 rev 1.1
August 2013
Page 36
HID GLOBAL CONFIDENTIAL AND/OR PROPRIETARY INFORMATION. This document contains confidential and/or proprietary information,
which may not be duplicated, published, disseminated or disclosed, or used for any purpose, without the written consent of HID Global
Corporation. If you are an unintended recipient of this information or are unwilling to accept the above restrictions, please immediately return
this document to HID Global Corporation, 15370 Barranca Pkwy, Irvine, CA 92618-3106..
3.9
Remove/Replace Ribbon Take-Up Motor (D930014)
Step Procedure
1
Caution: Turn OFF the Printer and unplug the power cord from the Printer.
2
Remove the screw F000178 from the motor assembly.
This is done from the front of the printer.
Tools needed:
T10 Torx screwdriver
Estimated Repair Time:
20 min
Preparation:
Remove the Covers
Important:
This procedure can only be performed by
authorized service personnel.