FOR RESTRICTED USE only
Fargo Electronics, Inc.
DTC550 Direct to Card Printer/Encoder User Guide (Rev. 2.8)
4-20
Resolving the Card Hopper Empty Error Message
Symptom:
The Hopper Empty error message is displayed on the LCD.
Step
Procedure
1
Refill the Hopper when convenient.
2
Be sure to load cards with the mag stripe down toward the rear of the Printer.
3
Turn the Card Sensor off if it is determined that the Hopper’s Card Sensor
cannot see these types of cards. (
Note:
The activated Sensor indicates to the
Printer that the Card Input Hopper is empty and the cards will not feed.)