FOR RESTRICTED USE only
Fargo Electronics, Inc.
DTC550 Direct to Card Printer/Encoder User Guide (Rev. 2.8)
6-28
Using the Image Color tab (continued)
Step
Procedure
4
Control the amount of heat the Printer uses (a) when printing with the
resin black panel of a full-color Ribbon or (b) when printing with a resin-
only Ribbon by adjusting the
Resin Heat
slide. See the
Printer
Components: Print Ribbons
description.
Move the slide to the left to cause less heat to be used in the printing
process, causing resin images to be lighter or less saturated.
OR
Move the slide to the right to cause more heat to be used, causing resin
images to be darker or more saturated.
(
Note:
This control can be helpful for fine-tuning the sharpness of resin
text and bar codes. See
Resolving the excessive Resin Printing
problems
.