FOR RESTRICTED USE only
Fargo Electronics, Inc.
DTC550 Direct to Card Printer/Encoder User Guide (Rev. 2.8)
6-90
Defining the Area to activate the Card Grid
Step
Procedure
1
Select on the appropriate
Defined Area
(see below)
to activate the card grid
in the upper half of the window. (
Note:
It is through this card grid that up to
five areas can be defined, as shown below.)
When the card grid is first activated, a small black square will appear at its:
•
default size of .2" x .2" (5mm x 5mm)
•
default location in the lower left-hand corner (0,0)
(
Note:
This square represents the first defined area.)