FOR RESTRICTED USE only
Fargo Electronics, Inc.
DTC550 Direct to Card Printer/Encoder User Guide (Rev. 2.8)
7-40
Changing the Root Password
The Passwords page allows the User to change the passwords needed to login as a
User. Changes to all settings require a login. (
Note:
However, these changes are only
protected by password after the password has been set. Users can only be added or
removed using Telnet commands.)
Step Procedure
1 Select
the
Administration
link.
2
Log in as a root User (using the old password) if you are so prompted.
(
Note:
Any change of setting will only be accepted after you have
successfully logged in.)
3 Select
the
Passwords
link to get to the Password web page.
4
Enter the current password in the
Root Password Old
textbox or leave it
blank if no password has been previously set.
5
Enter the new password in the
Root Password New
textbox or leave it
blank if you want to remove the old password.
6
Re-enter the new password in the
Root Password Confirm
textbox or
leave it blank if you want to remove the old password.
Continued on the next page