32
In the NEXHO application select the “Other Equipment” menu and press the
option “Configuration”. If you haven´t deactivated the password request, this
will be by default “nexho”.
If this is the first thermostat that you install in the zone:
Select “Add Zone”. Press the blank space where you can read
“Name” and introduce the name of the zone where the power
control module is being located. Usually the name of the zone
will be the name of the electric product you want to control with
that module.
Accept and wait until the zone is created.
Select the option “Add Modules”
While the screen shows the message “Waiting for the module”
press the installation button from your power control module
If all this has been done correctly, in your applications screen you
can see that the number of modules installed has changed from
0 to 1
The power control module is now ready to be controlled from
your NEXHO application
WORKING WITH POWER CONTROL MODULES
How to install power control modules in the automation
network
It is necessary to go through this process in order to be able to
control your power control modules from your nexho
application.
This operation will only be necessary when you are installing
power control modules. This configuration will remain saved
even with electric cut outs.
Summary of Contents for NEXHO-NT
Page 15: ...14 ...
Page 16: ...15 The configuration of the router is now finished ...
Page 63: ......