40
In the NEXHO application select the “Blinds” menu and press the option
“Configuration”. If you haven´t deactivated the password request, this will by
default “nexho”.
If this is the first blind module you install in the zone:
Please totally close the blinds, with the ends of the reel cord
correctly configured.
Select “Add Zone”. Press the blank space where you can read
“Name” and introduce the name of the zone where the blind
module is being located. Accept and wait until the zone is
created
Select the option “Add Modules”
When the screen shows the message “Waiting for the module”
press the installation button from your Blind Module
If all this has been done correctly, in your applications screen you
can see that the number of modules installed has changed from
0 to 1
Press the manual button to close the blinds and keep it pressed
until the blinds are totally up and reach the end of the reel
previously installed. Then let go of the button.
WORKING WITH BLIND MODULES
How to install a blind module in the automation network?
It is necessary to go through this process in order to be able to
control your blind modules from your nexho application.
This operation will only be necessary when you are installing
blind modules. This configuration will remain saved even with
electric cut outs.
Summary of Contents for NEXHO-NT
Page 15: ...14 ...
Page 16: ...15 The configuration of the router is now finished ...
Page 63: ......