54
Multifunction Remote (Nexho-MT). We will then be able to
associate actions to any of the four available buttons
Numeric Module NEXHO-NM. We will then be able to associate
actions to the existing buttons numbered from 1 to 9
Blind Modules. We can associate actions to the two cabled Wall
switches. The blinds module will now be configured as an
association element so you won´t be able to control it from here
as a normal blind module
Power control module. We can associate this to a cabled wall
switch. The power control module will now be configured as an
association element so you won´t be able to control it from here
as a normal power control module.
Select the action you want to happen when the signal of the activating
element you have chosen activates. Depending on the module you have
chosen as starter of the association you can then choose one, two, four or
nine actions to associate. If the equipment you have chosen has various
switches, you will be able to pick those you want to associate with this
action
You can add several different associations to each equipment, in the same
switch or in other ones you have not used.
Depending on the element you have associated, the application will ask you
if you want to configure a delayed period of time. If you pick this option, the
equipment will activate during that amount of time when receiving the
activation signal, to then revolve to its previous state.
You can configure an association in a Lights zone so it only Works for a few
hours a day; for example you can associate lights to a presence detector
but you don’t want this to activate during the day
How to make work during certain hours a day, an
association of light modules?
Summary of Contents for NEXHO-NT
Page 15: ...14 ...
Page 16: ...15 The configuration of the router is now finished ...
Page 63: ......
