Faria Pilot 1, Owner'S Manual

If no buttons are pushed within 5 seconds, 
the Pilot will revert automatically to the 

Normal Mode

.

You can also enter the 

Edit Mode

while in 

the

Select Mode

. The Pilot display will 

then stop flashing (Select Mode) 
indicating the change to the 

Edit Mode

.

(The operation of various edit modes will 
be separately explained for each function 
throughout the manual.

Upper Display Functions

Depth Sounder:

Description:

Depending on the bottom conditions the 
depth finder will read to 300 feet or the 
corresponding number of meters or 
fathoms to the nearest 1/10th (0.1). 

NOTE: A 600 ft. Triducer is also 

available.

The depth finder has an audible and LCD 
displayed depth alarm with adjustable 
shallow and deep limits and a depth below 
keel offset feature. These settings once 
made are stored in memory and will 
remain even if the battery is disconnected.

Operation:
Selecting the Depth Sounder Function:

Press the “MODE” button and activate the 

Select Mode

.

Press the “Up” arrow to select the upper 
display.

Continue pressing the “MODE” button 
again until the Function Indicator is 
pointing to FT, M or FA.
(The Function Indicator will automatically 
point to the last unit type selected. You are 
now in the Depth Finder function.)

Selecting the Depth Sounder Units.

Press and hold the “MODE” button until 
the Pilot beeps to select the 

Edit Mode

.

Continue pressing the “MODE” button 

quickly until the upper display reads “Un” 
(units).

Press the “Up” or “Down” arrow button to 
move the function indicator to the desired 
units either Feet (F), Meters (M) or 
Fathoms (FA).

Depth alarms:

When the shallow depth setting is read by 
the depth sounder, the Function Indicator 

Page 5

S

KL

D

F

FA

M

S

KL

D

F

FA

M

All manuals and user guides at all-guides.com