Assembly - 1370, 1385, 1395, 13114 Backsaver Auger
56
Figure 163
Install a ratchet strap (Item 1) onto the bracket (Item
2) on the top of the hopper (connect the opposite
end of the ratchet strap to the mounting bracket
on the top of the intake auger)
[Figure 163]
.
Figure 164
Install 0.313” square x 1.375” key onto the intake
auger shaft.
Remove the two 3/8” x 3/4” set screws on hopper
u-joint.
Tighten the ratchet strap, align the hopper u-joint
(Item 1) with the shaft (Item 2) on the intake auger.
Tighten the ratchet strap until the u-joint is all the
way on the shaft
[Figure 164]
.
Apply thread locker to the two set screws, install
and tighten against the key.
Figure 165
Align the mounting holes on the hopper and intake
auger.
Thread one 1/2” nut (Item 1) onto the hopper
adjustment bolt (Item 2), install the adjustment
bolt up, into the bracket on the intake auger. Install
a second 1/2” nut (Item 3) to hold the adjustment
bolt in position
[Figure 165]
.
Install one 3/4” x 1-5/8” bolt (Item 4) (from inside)
through the hopper, adjustment bolt and intake
auger. Install one 3/4” lock nut (Item 5) onto the
bolt
[Figure 165]
.
Repeat the procedure on the opposite side of the
hopper and intake auger.
Tighten the bolt (Item 4) and lock nut first (both
sides)
[Figure 165]
.
Tighten both adjustment bolts (Item 2) evenly
[Figure 165]
.
2
2
1
4
5
2
1
3
1
Summary of Contents for 1370
Page 1: ...062019 FK429 ASSEMBLY MANUAL BACKSAVER AUGER Models 1370 1385 1395 13114...
Page 2: ......
Page 92: ...Assembly 1370 1385 1395 13114 Backsaver Auger 90...
Page 93: ......