Assembly - 1370, 1385, 1395, 13114 Backsaver Auger
6
Figure 12
Locate the two lift arm axle pins.
Lift Arm Axle Pin Sizes:
• 1” x 5.63” - 1370 Models
• 1” x 6.38” - 1385 & 1395 Models
• 1.25” x 7.259” - 13114 Models
Align the RH lower lift arm (Item 1) with the two
mounts (Item 2) on the axle
[Figure 12]
.
Install one axle pin (Item 3) through the axle
mounts and RH lower lift arm
[Figure 12]
.
Install one 1-1/4” narrow rim washer and 1/4” x 2”
cotter pin (Item 4) onto the axle pin, securing the
RH lower lift arm to the axle
[Figure 12]
.
Install a strap around the LH lower lift arm. Connect
the strap to an approved lifting device.
NOTE:
Move strap forward or backward until the
component hangs level when raised off
the ground.
Raise and move the LH lower lift arm to the
assembly area.
Figure 13
Align the LH lower lift arm (Item 1) with the two
mounts (Item 2) on the axle
[Figure 13]
.
Install one axle pin (Item 3) through the axle
mounts and LH lower lift arm
[Figure 13]
.
Install one 1-1/4” narrow rim washer and 1/4” x 2”
cotter pin (Item 4) onto the axle pin, securing the
LH lower lift arm to the axle
[Figure 13]
.
3
1
4
4
1
3
2
2
Summary of Contents for 1370
Page 1: ...062019 FK429 ASSEMBLY MANUAL BACKSAVER AUGER Models 1370 1385 1395 13114...
Page 2: ......
Page 92: ...Assembly 1370 1385 1395 13114 Backsaver Auger 90...
Page 93: ......