Assembly - 1370, 1385, 1395, 13114 Backsaver Auger
7
Lift Arms and Hydraulic Cylinders - 1370, 1385,
1395 Models
Figure 14
Place the connecting link (Item 1) and pivot yoke
(Item 2) on the ground, between the LH & RH
lower lift arms
[Figure 14]
.
Figure 15
Align the connecting link (Item 1) with LH lower lift
arm (Item 2)
[Figure 15]
.
Connecting Link Pin Sizes:
• 2” x 27 - 15/16” - 1370 Models
• 2” x 34 - 3/16” - 1385 & 1395 Models
Install the connecting link pin (Item 3) through the
LH lower lift arm and connecting link
[Figure 15]
.
Figure 16
Continue installing the connecting link pin through
the connecting link and RH lower lift arm.
Install one 2” x 10 ga. narrow rim washer and one
15/16” x 3” cotter pin (Item 1) onto the connecting
link pin and secure
[Figure 16]
.
Figure 17
Install a chain (Item 1) through the upper LH & RH
lower lift arm mounts. Connect the chain to an
approved lifting device
[Figure 17]
.
Lift the LH & RH lower lift arms. Install blocks (Item
2) under the LH & RH lower lift arms
[Figure 17]
.
NOTE:
Verify that there is adequate space under
the LH & RH lower lift arms for installing
the bottom cylinder pin.
Lower the LH & RH lower lift arms onto the blocks.
2
1
1
1
2
3
1
2
Summary of Contents for 1370
Page 1: ...062019 FK429 ASSEMBLY MANUAL BACKSAVER AUGER Models 1370 1385 1395 13114...
Page 2: ......
Page 92: ...Assembly 1370 1385 1395 13114 Backsaver Auger 90...
Page 93: ......