IMPORTANT
Turn off a hydraulically driven centrifugal pump using
the ”float” position of the tractor’s hydraulic valve. This
allows the motor to stop slowly helping to protect the
motor and motor seals.
IMPORTANT
Only you, the operator, can determine the length of
time required to completely rinse all chemical residue
from the sprayer tanks and plumbing systems.
Rinse Eductor While Filling
: Rinse the Eductor via the following:
1. Close and lock Cleanload lid by turning clock-
wise.
2. Release the safety locking band on the hopper
rinse ball valve and turn on for 20 seconds.
3. Close the rinse ball valve and return locking
band to locked position.
4. Open lid and inspect for chemical residue.
Repeat step 2 as necessary.
5. Close eductor tank valve.
6. Close eductor inlet valve and eductor outlet
valve.
7. Open solution quick fill valve to resume nor-
mal fill operation.
Fill Solution Tank, With Tank Agitation
: Load the solution
tank using tank agitation via the following steps:
1. Close all valves.
2. Remove solution quick fill cap and connect load hose.
3. Open solution quick fill valve and the solution tank main
valve.
4. Open valve on loading reservoir (i.e. nurse tank).
5. Start the remote transfer pump.
6. Open the agitation valve.
7. Engage the liquid pump of the trailer sprayer.
8. Disengage the liquid pump of the trailer sprayer when
adequate agitation is achieved.
9. Run remote transfer pump until the desired amount of
solution is transferred into the trailer sprayer.
10. Close the agitation valve.
11. Close valves on loading reservoir.
12. Close the solution quick fill and the solution tank main
valves.
13. Remove load line and replace cap on sprayer quick fill.
Operation Instructions - Section B
Eductor Inlet Valve
(Closed Position)
Solution Quick Fill
(Closed Position)
Eductor Outlet Valve
(Closed Position)
Eductor Tank Valve
(Closed Position)
Valve Panel
(All valves in closed position)
Agitation
Valve
20
Summary of Contents for 1600
