Assembly - 7420, 8420, 8420G
24
Figure 10
8420 & 8420G Models
Attach the top brackets of the left and right hitch
arms (Item 1) by bolting a link pin bushing (Item
2) between the top brackets with a 3/4” x 4” bolt
(Item 3) [Figure 10], flat washer, and lock nut. Use
the bottom front holes on the brackets.
Attach the hitch top bar (Item 4) between the top
brackets with a 3/4” x 4” bolt (Item 5) [Figure 10],
flat washer, and lock nut. Use the rear holes on the
brackets. Tighten all hardware.
Attach a Category 1 top link pin (Item 6) [Figure 10]
to the top front holes of the top brackets.
The Category 1 pin is used for a standard three-
point hitch only. The bushing in the lower hole is
used for the Quick Hitch.
Discharge Spout & Deflector
Figure 11
Align the geared spout ring (Item 1) to the bottom
of the discharge spout (Item 2) [Figure 11].
The smooth portion (Item 3) [Figure 11] of the spout
ring must face the side opposite the hydraulic
motor mount.
Attach the geared spout ring to the bottom of the
discharge spout using four 5/16” x 1” hex bolts,
four 5/16” flat washers, and four 5/16” lock nuts.
DISCHARGE
1
1
2
2
1
3
3
6
5
4
Summary of Contents for Allied 8420G
