Assembly - 7420, 8420, 8420G
26
Hydraulic Spout Rotator
Figure 14
Align the motor (Item 1) with the main frame
mount (Item 2) [Figure 14] and attach with four
3/8” bolts and four 3/8” lock washers. Ensure that
the manifold is facing the snowblower hitch when
mounting to the main frame.
Slide the gear (Item 3) [Figure 14] onto the motor
drive line with the gear hub facing downwards.
Align the gear with the toothed spout ring. Attach
the gear using one 1/4” x 3/4” bolt and 1-1/2” OD x
5/16” ID washer.
The spout opening should face forward. The non-
toothed smooth portion of the gear spout ring
should face the side opposite of the motor mount.
Attach the gear guard cover (Item 4) [Figure 14]
above the motor using two 5/16” x 1” bolts, two
5/16” washers, and two 5/16” lock nuts.
Attach the hydraulic hoses to manifold. Route
the hoses through the hose holder and to the
snowblower hitch.
1
2
3
4
Summary of Contents for Allied 8420G
