Farm21 FS21, User Manual

11

iOS

When using iOS 11 or later, a QR-scanner is build-in with the standard camera 
application.

1. 

Open the camera application and focus on the QR-code (no need to take a 
picture). 
A direct link to the Farm21 dashboard will now appear on the top of your screen.

2. 

Tap on the link to open the Farm21 dashboard. 

If you are using an older version of iOS, go to the App Store, search for ‘QR 
code scanner’ and install a QR code scanner. Use this application to scan 
the Farm21 QR-code.

Android

When using Android, a QR-scanner is build-in with the standard camera application. 

1. 

Open the camera application and focus on the QR-code on the sensor (there is no 
need to take a picture).

If this function is not available go to the Play Store, search for ‘QR code 
scanner’ and install a QR-code scanner. Use this application to scan the 
Farm21 QR-code.

9.3 

Activate and link the FS21 to the dashboard

After scanning the QR-code on the sensor you are automatically redirected towards 
the Farm21 dashboard. A ‘sensor activation page’ will be prompted.

1. 

Fill in all the details for this particular sensor.

2. 

Login with your Farm21 account, if you are not logged in already.
Each sensor requires the parameters as shown.

3. 

Fill in the required details and press ‘submit’ to add this sensor to your account. 

The set sensor location is based on the current location of your mobile 
device at the point of registration. This can be adjusted later in the 
dashboard by selecting the correct sensor location on the map.