background image

15

11  Maintenance & storage

 

6

WARNING 

 

Do not attempt to repair the FS21. If the FS21 does not operate correctly, replace 
it with a new FS21.

 

The FS21 does not contain any self-serviceable parts.

 

Do not clean the inside of the FS21.

 

Do not use aggressive chemical cleaning agents such as ammonia, acid or 
acetone when cleaning the FS21.

11.1  Maintenance

Clean the outside of the soil moisture add-on after each use by using a wet piece of 
cloth. 

Cleaning the soil moisture add-on ensures a good soil contact in the next 
installation round. 

11.2  Storage

1. 

Clear any dirt from the sensor using a damp cloth before storing the FS21. 

2. 

Press and hold the power button for 10 seconds to enable deep sleep mode to 
prevent the FS21 from taking readings while in storage. 

3. 

Store the FS21 in a warm and dry location.

12  Warranty

The FS21 is tested for correct operation before the FS21 leaves the factory. The 
warranty period is 12 months after delivery of the hardware. 
For the duration of one year, Farm21 guarantees that any defect in materials or 
manufacturing defects will be repaired free of charge. The rights under the warranty 
lapse if the defects or damage are wholly or in part caused by improper use or 
incorrect treatment, or if they are in any other way attributable to the customer. 

To qualify for warranty, please contact support: 

support@farm21.com

13  Disclaimer

Specifications and information in this document are subject to change without notice. 
Farm21 products are not warranted or authorized for use as critical components in 
medical, lifesaving, or life-sustaining applications, or other applications where a 
failure would reasonably be expected to cause severe personal injury or death.

Summary of Contents for FS21



















Reviews: