FarmBoy
™
BATTERY SPRAYERS
FB- KMB- 4165 / 4185 / 4169 / 4189 / 4180 / 4181
FB-KBS-160/161/180/181
FB-KMS-16L
: www.kisankraft.com
: info@kisankraft.com
: +91.80. 22178200
Page 14 of 28
Using Place
Only in inside
The time of charging for the new machine or a machine
stored for a long time must be 24 hours.
Don’t let the switch in the place of “
一
” while charging.
Please pull out the wire of the charger from the jack after the charging is
completed.
An Improper battery wire connection will burn the battery and charger. The red
wire should be connected with the red end of the battery.
Don’t charge in a wet room or with wet hands, as it may cause an electric shock.
Please use the special charger for this machine in order to avoid fire. In
addition, it is prohibited to charge any other electrical machines with the special
charger of this machine or as a power source.
Please pull out the wire of the battery from the socket once the charging is
completed.
Don’t let this machine exposed to the sun, high temperature conditions and the
things radiating heat, which may lead to ageing of the battery, battery leakages,
radiate heat, split and even fires.
If you find the charger abnormal, pull out from the plug immediately in order to
avoid electric shock, radiating heat and causing fires.
Don’t adopt gener
ator as the electrical source of charging, which may destroy
the charger. Don’t pull the wire off the charger forcibly.
Please clean the electrical pick off of the battery with dry cloth. Bad connection
will cut the power supply or may result in charge failure.
Be sure of the safety, please store this machine in place out of reach of children
and infant in order to avoid an electric shock.
If the battery of this machine needs to be replaced, it must be
confirmed by the company. The disabled battery could
n’t be thrown
away anywhere. Please send it into the proper recycle centre which
can deal with it.
3. Connection of the spraying parts:
a) Fix the spraying pole in the place as shown in the figures.
b) Insert the spraying pole into the switch and fasten the screw cap.
Caution
: Don’t fasten the
nut with the pliers, or it may harm the nut.
c) Hold the knob assembly with one hand and adjust the direction of the nozzle
by holding the spraying head with the other hand.
