17
Machine hydraulics connection
-
Only connect the hydraulic hoses of the machine when the hydraulic circuits of the machine and the tractor
(unit) are depressurized.
-
The hydraulic system is under high pressure.
-
Regularly check all lines, hoses and fittings for leaks and obvious damage. Eliminate any defects
immediately.
-
When searching for and removing leaks, use only suitable aids, protective goggles and gloves are the
basis.
-
Use the plugs (on the machine) and sockets (on the tractor) of quick couplings of the same type to connect
the machine hydraulic system to the tractor. Connect the quick couplings of the machine to the hydraulic
circuits of the tractor according to the table below.
To prevent involuntary or any stranger mistaken hydraulics movement, the control
cabinets on the tractor must be secured or locked when not in use or in the
transport position.
It is forbidden to disassemble parts of the machine hydraulic system that are
under pressure. Hydraulic oil that penetrates the skin under high pressure causes
of injury, seek medical advice immediately.
Circle
Plug
Circuit color
Function
Oil flow l/min
Constant flow
Return waste
branch
ISO 20
Free fall
0
Hydraulic
switchboard
ISO 12,5
Pressure
MAX
ISO 12,5
Reverse
MAX
Preparation
section
ISO 12,5
Pressure
20-40
ISO 12,5
Reverse
20-40
Flexi board
ISO 12,5
Pressure
15-20
ISO 12,5
Reverse
15-20
Fan
ISO 12,5
Pressure
20-40
Microdrill
ISO 12,5
Pressure
15-20
