9
|
59
2 GENERAL INSTRUCTIONS FOR USE
•
The machine is made in accordance with the latest equipment state and approved safety
regulations. However, dangers of user or third person injury or machine damage or
creation of other material damage may arise during use.
•
Use the machine only in a technically sound condition, in accordance with its purpose,
aware of possible dangers, and while adhering to the safety instructions of this operating
manual! The manufacturer is not liable for damages caused by the use of the machine
that is in contradiction with the limit parameters of the machine and with the
instructions for the use of the machine . The user bears the risk.
Immediately remove especially the failures that may negatively affect safety!
•
Machine operation may be performed by a person authorised by the operator under
these conditions :
•
It must own a valid driver's licence of the corresponding category,
•
It must be demonstrably familiarised with the safety regulations for work with the
machine and must practically master the machine operation,
•
The machine may not be operated by juveniles,
•
It must know the meaning of the safety signs located on the machine. Their
respecting is important for safe and reliable machine operation.
•
Maintenance and servicing repairs on the machine may only be performed by a person :
•
Authorised by the operator,
•
Educated in the machinery field with knowledge of repairs of similar machines,
•
Demonstrably familiarised with safety regulations for work with the machine,
•
During a repair of a machine connected to a tractor, it must own a driver's licence of
the corresponding category.
•
Machine operator must secure the safety of other persons when working with the
machine or transporting the machine.
•
During machine work in the field or during transport, the operator must control the
machine from the tractor's cabin.
•
The operator may enter the machine structure only with the machine at rest and blocked
against movement, namely only for these reasons :
•
Adjustment of the machine working parts,
•
Repair and maintenance of the machine,
•
Adjustment of the working parts of the machine after unfolding the side frames.
•
When stepping on the machine, do not step on roller tyres or other rotary parts. Those
may turn and you can cause very serious injuries by the subsequent fall.
•
Any changes or modifications of machine may be performed only with written consent of
the manufacturer.
For possible damage arisen due to ignoring this instruction, the producer bears no
responsibility.
The machine must be maintained equipped with prescribed accessories and equipment
including safety marking.
All warning and safety signs must be legible and in their places. In case of damage or loss,
these signs must be immediately renewed.
•
The operator must have the Operating Manual with the work safety requirements
available at any time when working with the machine.
Summary of Contents for FANTOM 1050 PRO
Page 2: ...2 59 Prepared by Technical Department Farmet a s on 11 7 2019 changes reserved ...
Page 4: ...PREFACE 4 59 IMPORTANT READ CAREFULLY BEFORE USE KEEP FOR FUTURE REFERENCE ...
Page 16: ...WORK SAFETY LABELS FANTOM 1250 PRO 16 59 ...
Page 30: ...COMMISSIONING Machine position for folding Machine position for unfolding 30 59 ...
